Free shipping on all US orders over $100.

Support
Cart is empty
Cart totals
Subtotal:
$0.00
Tax (estimated for Latvia)
$0.00
Total:
$0.00
Popular Search
Page
Support

Overview

For support regarding the Edge Evo, delve into our setup guide, specifications, and fact sheet. We've gathered crucial resources to enhance your experience with our Edge Evo device.
Download fact sheet
Supported Apple Devices
Supported Apple Devices
iPad 10.2" - 7th, 8th & 9th Gen
Recommended Counter Height
Recommended Counter Height
29.53” - 43.43” (75 - 110 cm)
Measuring
Measuring
Height: 9.06” (230 mm)
Width: 10.35” (263 mm)
Weight
Weight
3.97 Ibs (1.80 kg)
Materials
Materials
Die-cast aluminum with powder coating

Setup Guide

Screw Mount (Above)
Screw Mount (Below)
Optional Extras
Lift base case from plate
01 Lift base case from plate
Lift base casing from the base plate.
Drill pilot holes
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
Drill larger hole if running cable through surface
03 Drill larger hole if running cable through surface
If you are running your charging cable through the surface, remove the cable clip and ensure to drill a larger hole to feed cable through.
Screw down stand to base plate
04 Screw down stand to base plate
Screw down your stand through the base plate using the wood screws provided.
Attach base casing to plate
05 Attach base casing to plate
Press down the base casing over the base plate.
Unlock security lock
06 Unlock security lock
Unlock the security lock with the L shape key and slide the clamp out.
Plug cable and squeeze tablet into clamp
07 Plug cable and squeeze tablet into clamp
Plug in charging cable and squeeze the tablet into the clamp with the charging cable running behind the tablet.
Re-attach clamp arm
08 Re-attach clamp arm
Re-attach the clamp arm by sliding in and squeezing the tablet.
Lock the security lock
09 Lock the security lock
Remain holding clamp together until you have rotated the security lock with the L shape key into the lock position.
Remove base plate and casing
01 Remove base plate and casing
Unscrew the three screws to remove the base plate and base casing.
Drill pilot holes
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
Drill larger hole if running cable through surface
03 Drill larger hole if running cable through surface
If you are running your charging cable through the surface, remove the cable clip and ensure to drill a larger hole to feed cable through.
Screw down stand through mounting surface
04 Screw down stand through mounting surface
Screw down your stand through mounting surface using the screws and washers provided.
Unlock security lock
05 Unlock security lock
Unlock the security lock with the L shape key and slide the clamp out.
Plug cable and squeeze tablet into clamp
06 Plug cable and squeeze tablet into clamp
Plug in the charging cable and squeeze the tablet into the clamp with the charging cable running behind the tablet.
Re-attach clamp arm
07 Re-attach clamp arm
Re-attach the clamp arm by sliding in and squeezing the tablet.
Lock security lock
08 Lock security lock
Remain holding clamp together until you have rotated the security lock with the L shape key into the lock position.
Rotation Lock
01 Rotation Lock
To lock rotation, remove Edge case and screw lock screw as shown to lock. Then attach the case in desired position.
Tilt Adjustment Lock
02 Tilt Adjustment Lock
Using Allen key provided, tighten screw at desired angle to lock in position.
Problems during setup?
Share Your Cart