Support
Cart is empty
Cart totals
Subtotal:
$0.00
Tax
$0.00
Total:
$0.00
Popular Search
Page
Support

Overview

The Edge Evo floor stand range features a unique clamp based design that includes a simple security lock release option. Perfect for POS and kiosk self-service applications. Designed for the 10.2” iPad.
Download fact sheet
Supported Apple Devices
Supported Apple Devices
iPad 10.2" - 7th, 8th & 9th Gen
Measuring
Measuring
Height: 41.34" (105 cm)
Width: 11.81” (30 cm)
Weight
Weight
11.91 lbs (5.40 kg)
Materials
Materials
Die-cast aluminum with powder coating

Setup Guide

Floor Stand
Optional Extras
Feed cable through hinge pole
01 Feed cable through hinge pole
Feed cable up through the hinge pole. Ensure enough length is fed through to easily plug into your tablet.
Attach hinge pole to base pole
02 Attach hinge pole to base pole
Slide the hinge pole onto the base pole while feeding the cable through. Screw in grub screws to secure.
Screw on baseplate
03 Screw on baseplate
Screw on baseplate with screws with the charging cable running underneath.
Screw Edge case to hinge
04 Screw Edge case to hinge
Locate the Edge case and attach to the hinge and screw in the screws to secure.
Remove clamp
05 Remove clamp
Unlock the security lock with the L shape key and slide the clamp out.
Remove cable cover clip if routing cable in stand
06 Remove cable cover clip if routing cable in stand
If you are running a charging cable through the stand, remove the cable cover clip before step 7.
07 Plug in charging cable
Plug in the charging cable and squeeze the tablet into the clamp with the cable running behind the tablet.
08 Re-attach clamp arm
Re-attach the clamp arm by sliding in and squeezing tablet.
09 Lock the security lock
Remain holding clamp together until you have rotated the security lock with the L shape key into the lock position.
01 Rotation Lock
To lock rotation, remove Edge case and screw lock screw as shown to lock. Then attach the case in desired position.
02 Tilt Adjustment Lock
Using Allen key provided, tighten screw at desired angle to lock in position.
Problems during setup?
l
Share Your Cart