Support
Cart is empty
Cart totals
Subtotal:
$0.00
Tax
$0.00
Total:
$0.00
Popular Search
Page
Support

Overview

For the Edge Evo Wall Mount, explore our setup guide, specifications, and fact sheet. Essential information is at your fingertips, ensuring an optimal experience with our Edge Evo Wall Mount.
Download fact sheet
Supported Apple Devices
Supported Apple Devices
iPad 10.2" - 7th, 8th & 9th Gen
Recommended Positioning Height
Recommended Positioning Height
51.2” - 59” (130 - 150 cm)
Measuring
Measuring
Height: 9.06” (230 mm)
Width: 10.35” (263 mm)
Weight
Weight
3.97 Ibs (1.80 kg)
Materials
Materials
Die-cast aluminum with powder coating

Setup Guide

Screw Mount
Optional Extras
01 Lift base case from plate
Lift base casing from the base plate.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
03 Drill larger hole if running cable through surface
If you are running your charging cable through the surface, remove the cable clip and ensure to drill a larger hole to feed cable through.
04 Screw down stand to base plate
Screw down your stand through the base plate using the wood screws provided.
05 Attach base casing to plate
Press down the base casing over the base plate.
06 Unlock security lock
Unlock the security lock with the L shape key and slide the clamp out.
07 Plug cable and squeeze tablet into clamp
Plug in charging cable and squeeze the tablet into the clamp with the charging cable running behind the tablet.
08 Re-attach clamp arm
Re-attach the clamp arm by sliding in and squeezing the tablet.
09 Lock the security lock
Remain holding clamp together until you have rotated the security lock with the L shape key into the lock position.
01 Rotation Lock
To lock rotation, remove Edge case and screw lock screw as shown to lock. Then attach the case in desired position.
02 Tilt Adjustment Lock
Using Allen key provided, tighten screw at desired angle to lock in position.
Problems during setup?
Share Your Cart