Popular Search
Touch Nexus
Getting Started
Guide
The Touch Nexus tablet stand has been thoughtfully designed to securely display your tablet without requiring a case, clamps or cables. Simply showcase your tablet as it is was designed - slim, sleek and unobstructed. Available in different mounting options, the Touch is perfect for desktop use.
View product page
Desktop stand
Touch Nexus
Overview
The Touch tablet stand has been thoughtfully designed to securely display your tablet without requiring a case, clamps or cables. Simply showcase your tablet as it is was designed - slim, sleek and unobstructed. Available in different mounting options, the Touch is perfect for desktop use.
Download fact sheet
Supports All Tablets
Might update your iPad or android tablet in the future? The Touch tablet holder supports all devices and is secured by 4 strong 3M Command Strip adhesives included with the stand.
Recommended Counter Height
29.53” - 35.43” (75 - 90 cm)
Measuring
Height: 3.19” (81 mm)Width: 2.83” (72 mm)
Weight
3.31 Ibs (1.50 kg)
Materials
Die-cast aluminum with powder coatingSetup Guide
Screw Mount
Freestanding & Adhesive Mount
Optional Extras
01 Line up for mounting
Follow the above locations to line up your surface mounting and cable feed.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance. 03 Drill a larger hole if running cable through surface
If you are running your charging cable through a surface, ensure to drill a larger hole to feed cable through.
04 Screw down stand
With the cable channel facing out the back of the stand, screw down your stand using the wood screws provided. 05 Screw down case
Place case back on the stand and screw back in the 4 screws.
06 Peel off adhesive paper
Peel off the paper from the 3M Command strip
07 Press bracket onto center of tablet
Place the bracket in the center of the tablet and press down and hold for 20 seconds.
08 Secure top bracket & plug charger cable
Re-attach top bracket and secure with the lock screw. Plug in the charger cable.
01 Remove adhesive bracket & feed cable through stand
Unscrew top bracket that holds the adhesive and remove. Feed cable through the stand. 02 Peel off adhesive paper
Peel off the paper from the 3M Command strip 03 Press bracket onto center of tablet
Place the bracket in the center of the tablet and press down and hold for 20 seconds.
04 Secure top bracket
Re-attach top bracket and secure with the lock screw.
05 Wipe base of stand & mounting surface
Wipe base of stand and your mounting surface with alcohol wipes provided and let dry.
06 Stick adhesive to stand base
Stick 3M adhesive to the base of stand.
07 Place stand base
Firmly place base of stand on your mounting surface. Let the stand sit for 24 hours before use.