Support
Cart is empty
Cart totals
Subtotal:
$0.00
Tax
$0.00
Total:
$0.00
Popular Search
Page
Support

Overview

The Elite tablet stand offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Download fact sheet
Supported Apple Devices
Supported Apple Devices
iPad 10.9'" - 10th Gen
iPad 10.2" - 7th, 8th & 9th Gen
iPad Pro 12.9" - 3rd, 4th & 5th Gen
iPad Pro 9.7" - 2nd Gen
iPad Air 9.7" - 2nd Gen
Supported Samsung Devices
Supported Samsung Devices
Galaxy Tab 10.4" - A7
Galaxy Tab 11" - S7 & S8
Supported Microsoft Devices
Supported Microsoft Devices
Surface Pro 13" - 8 & 9
Recommended Counter Height
Recommended Counter Height
29.53” - 43.31” (75 - 110 cm)
Measuring
Measuring
Height: 10.24” (260 mm)
Width: 11.69” (297 mm)
Weight
Weight
3.97 lbs (1.80 kg)
Materials
Materials
Die-cast aluminum with powder coating

Setup Guide

Screw Mount (From Above)
Screw Mount (From Below)
Freestanding
Optional Extras
01 Drill pilot holes
Lift the Evo pole base cover from the base plate & drill pilot holes. Refer to the mounting guide for assistance.
02 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
03 Screw down stand
Screw down your Evo pole through the base plate using the wood screws provided & then press down base cover.
04 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
05 Feed cable & lock faceplate
Plug in charging cable & place tablet into case, place faceplate back on & lock.
01 Unscrew the base
Locate Evo pole & unscrew the three screws to remove the base plate & base cover.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
03 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
04 Screw down stand
Screw down your Evo pole through mounting surface using the screws & washers provided.
05 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
06 Feed cable & lock faceplate
Feed charging cable through & plug in. Put tablet into the holder & place faceplate back on & lock.
01 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
02 Feed cable & lock faceplate
Feed charging cable through & plug in. Put tablet into the holder & place faceplate back on & lock.
01 Elite Holder Cable Cutout
Unscrew existing closed cable cutout & install the open cable cutout included with stand.
02 Evo X Rotation Lock
Place case on the pole in desired rotation & screw lock screw as shown to lock rotation.
03 Evo X Tilt Adjustment
Lock Using Allen key provided, tighten screw at desired angle to lock in position.
Problems during setup?
Share Your Cart