VESA Nexus
Getting Started
Guide
The VESA Nexus is designed to fit any monitor or display with VESA mounting capabilities, ensuring easy compatibility with a wide range of devices.
View product page
Desktop stand
VESA Nexus
Overview
The VESA Nexus is designed to fit any monitor or display with VESA mounting capabilities, ensuring easy compatibility with a wide range of devices.
Download fact sheet
Supported Monitors
100x100mm VESA-compatible monitors
Recommended Counter Height
29.53” - 35.43” (75 - 90 cm)
Measuring
Height: 3.19” (81 mm)Width: 2.83” (72 mm)
Weight
2.21 Ibs (1 kg)
Materials
Die-cast aluminum with powder coatingSetup Guide
Screw Mount (From Above)
Optional Extras
01 Line up for mounting
Follow the above locations to line up your surface mounting and cable feed.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
03 Running charger cable
If you are running your charging cable through a surface, ensure to drill a larger hole to feed cable through.
04 Screw down stand
With the cable channel facing out the left hand side of the stand, screw down your stand using the wood screws provided.
05 Screw VESA case to hinge
Locate the VESA mount and attach to the hinge by screwing in the x4 screws to secure.
06 Feed cable through hinge pole
Feed cable up through the hinge pole. Ensure enough length is fed through to easily plug into your monitor.
07 Attach VESA compatible device
Attach your VESA compatible device by screwing in from the rear. Plug cable into monitor.
01 Rotation Lock
To change your stand to landscape or portrait, unscrew to remove case and place back on in desired angle.Problems during setup?
Related Articles
Help us to improve.
Was this article helpful?