Support
Cart is empty
Cart totals
Subtotal:
$0.00
Tax
$0.00
Total:
$0.00

Overview

The Elite Nexus Wall Mount offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Download fact sheet
Supported Apple Devices
iPad 10.9'" - 10th Gen
iPad 10.2" - 7th, 8th & 9th Gen
iPad Pro 12.9" - 3rd, 4th & 5th Gen
iPad Pro 9.7" - 2nd Gen
iPad Air 9.7" - 2nd Gen
Supported Samsung Devices
Galaxy Tab 10.4" - A7
Galaxy Tab 11" - S7 & S8
Supported Microsoft Devices
Surface Pro 13" - 8 & 9
Recommended Positioning Height
51.2” - 59” (130 - 150 cm)
Measuring
Height: 4.65” (118 mm)
Width: 11.81” (300 mm)
Weight
2.87 Ibs (1.30 kg)
Materials
Die-cast aluminum with powder coating

Setup Guide

Screw Mount
Optional Extras
Elite Nexus Desktop Screw Mount Step 1
01 Line up surface mounting & cable feed
Follow the above locations to line up your surface mounting and cable feed.
Elite Nexus Desktop Screw Mount Step 2
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
Elite Nexus Desktop Screw Mount Step 3
03 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
Elite Nexus Desktop Screw Mount Step 4
04 Screw down stand
With the cable channel facing out the left hand side of the stand, screw down your stand using the wood screws provided.
Elite Nexus Desktop Screw Mount Step 5
05 Screw down case & remove faceplate
Place case back on the stand & screw back in the 4 screws then unlock case and remove faceplate.
Elite Nexus Desktop Screw Mount Step 6
06 Place the tablet
Place your tablet in the case & plug in charging cable then put the faceplate back on & lock.
Elite Nexus Extras Cable Cutout
01 Elite Holder Cable Cutout
Unscrew existing closed cable cutout & install the open cable cutout included with stand.
Elite Nexus Extras Position Lock
02 Nexus Pole Position Lock
Rotate stand 45 degrees so cable hole is on the left, then screw in lock screw as shown. This will lock the rotation for a fixed option.
Problems during setup?

Help us to improve.