Cart totals
Subtotal:
$0.00
Tax (estimated for the United States (US))
$0.00
Total:
$0.00
Not sure of which product you after?
Elite Nexus Wall Mount
Getting Started
Guide
The Elite Nexus wall mount offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Wall mount
Elite Nexus
Overview
The Elite Nexus wall mount offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Download fact sheet
Supported Apple devices
iPad 10.9'" - 10th GeniPad 10.2" - 7th, 8th & 9th Gen
iPad Pro 12.9" - 3rd, 4th & 5th Gen
iPad Pro 9.7" - 2nd Gen
iPad Air 9.7" - 2nd Gen
Supported Samsung devices
Galaxy Tab 10.5" - A8Galaxy Tab 10.4" - A7
Galaxy Tab 11" - S7 & S8
Galaxy Tab 12.4" - S7+
Supported Microsoft devices
Surface Pro 13" - 8 & 9
Recommended positioning height
51.2” - 59” (130 - 150 cm)
Measuring
4.65” (118mm) high11.81” (300mm) width
Weight
1.30 kg (2.87 Ibs)
Product finish
White with matte white grille;black with matte black grille.
Include
Stand, camera cutout, cable cutout, setup guide
Installation
Fully pre-assembled for trouble-free roll outsSetup guide
Screw mount
Optional Extras
01 Line up surface mounting & cable feed
Follow the above locations to line up your surface mounting and cable feed.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
03 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
04 Screw down stand
With the cable channel facing out the left hand side of the stand, screw down your stand using the wood screws provided.
05 Screw down case & remove faceplate
Place case back on the stand & screw back in the 4 screws then unlock case and remove faceplate.
06 Place the tablet
Place your tablet in the case & plug in charging cable then put the faceplate back on & lock.
01 Elite Holder Cable Cutout
Unscrew existing closed cable cutout & install the open cable cutout included with stand.
02 Nexus Pole Position Lock
Rotate stand 45 degrees so cable hole is on the left, then screw in lock screw as shown. This will lock the rotation for a fixed option.Problems during setup?
Related Articles
Help us to improve.
Was this article helpful?