Not sure of which product you after?
Elite Evo
Getting Started
Guide
The Elite Evo tablet stand offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Desktop stand
Elite Evo
Overview
The Elite tablet stand offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Download fact sheet
Supported Apple devices
iPad 10.9'" - 10th GeniPad 10.2" - 7th, 8th & 9th Gen
iPad Pro 12.9" - 3rd, 4th & 5th Gen
iPad Pro 9.7" - 2nd Gen
iPad Air 9.7" - 2nd Gen
Supported Samsung devices
Galaxy Tab 10.4" - A7Galaxy Tab 11" - S7 & S8
Supported Microsoft devices
Surface Pro 13" - 8 & 9
Recommended counter height
29.53” - 43.31” (75 - 110 cm)Perfect for customer facing Point Of Sale (POS) and kiosk stands.
Measuring
10.24” (260mm) high11.69” (297mm) width
Weight
1.80 kg (3.97 Ibs)
Product finish
White with matte white grille;black with matte black grille.
Include
Stand, pole, camera cutout, cable cutout, setup guide
Installation
Fully pre-assembled for trouble-free roll outsSetup guide
Screw mount (From above)
Screw mount (From below)
Freestanding
Optional Extras
01 Drill pilot holes
Lift the Evo pole base cover from the base plate & drill pilot holes. Refer to the mounting guide for assistance.
02 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
03 Screw down stand
Screw down your Evo pole through the base plate using the wood screws provided & then press down base cover.
04 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
05 Feed cable & lock faceplate
Plug in charging cable & place tablet into case, place faceplate back on & lock.
01 Unscrew the base
Locate Evo pole & unscrew the three screws to remove the base plate & base cover.
02 Drill pilot holes
Drill pilot holes to assist with screw base mounting. Refer to the mounting guide for assistance.
03 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
04 Screw down stand
Screw down your Evo pole through mounting surface using the screws & washers provided.
05 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
06 Feed cable & lock faceplate
Feed charging cable through & plug in. Put tablet into the holder & place faceplate back on & lock. 01 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate. 02 Feed cable & lock faceplate
Feed charging cable through & plug in. Put tablet into the holder & place faceplate back on & lock.
01 Elite Holder Cable Cutout
Unscrew existing closed cable cutout & install the open cable cutout included with stand.
02 Evo X Rotation Lock
Place case on the pole in desired rotation & screw lock screw as shown to lock rotation.
03 Evo X Tilt Adjustment
Lock Using Allen key provided, tighten screw at desired angle to lock in position.Problems during setup?
Related Articles
Help us to improve.
Was this article helpful?