Support Enterprise
Build yours
Cart is empty
Cart totals
Tax (estimated for the United States (US))
Not sure of which product you after?


The Elite Evo wall mount offers high security and durability in a sleek and stylish casing. Featuring a 4 point lock and a strong coated metal faceplate to protect your iPad or android tablet.
Download fact sheet
Supported Apple devices
iPad 10.9'" - 10th Gen
iPad 10.2" - 7th, 8th & 9th Gen
iPad Pro 12.9" - 3rd, 4th & 5th Gen
iPad Pro 9.7" - 2nd Gen
iPad Air 9.7" - 2nd Gen
Supported Samsung devices
Galaxy Tab 10.4" - A7
Galaxy Tab 11" - S7 & S8
Supported Microsoft devices
Surface Pro 13" - 8 & 9
Recommended positioning height
51.2” - 59” (130 - 150 cm)
10.24” (260mm) high
11.69” (297mm) width
1.80 kg (3.97 Ibs)
Product finish
White with matte white grille;
black with matte black grille.
Stand, pole, camera cutout, cable cutout, setup guide
Fully pre-assembled for trouble-free roll outs

Setup guide

Screw mount
Optional Extras
Elite Evo Desktop Screw Mount Above 1
01 Drill pilot holes
Lift the Evo pole base cover from the base plate & drill pilot holes. Refer to the mounting guide for assistance.
Elite Evo Desktop Screw Mount Above 2
02 Running charger cable
If you are running your charging cable through the surface, ensure to drill a larger hole to feed cable through.
Elite Evo Desktop Screw Mount Above 3
03 Screw down stand
Screw down your Evo pole through the base plate using the wood screws provided & then press down base cover.
Elite Evo Desktop Screw Mount Above 5
04 Screw down case & remove faceplate
Place Elite holder on Evo pole & screw in the 4 screws. Unlock holder with keys provided & remove faceplate.
Elite Evo Desktop Screw Mount Below 6
05 Feed cable & lock faceplate
Plug in charging cable & place tablet into case, place faceplate back on & lock.
Elite Nexus Extras Cable Cutout
01 Elite Holder Cable Cutout
Unscrew existing closed cable cutout & install the open cable cutout included with stand.
Evo Floor Stand Extras Rotation Lock
02 Evo X Rotation Lock
Place case on the pole in desired rotation & screw lock screw as shown to lock rotation.
Evo Floor Stand Extras Adjustment Lock
03 Evo X Tilt Adjustment
Lock Using Allen key provided, tighten screw at desired angle to lock in position.
Problems during setup?

Related Articles

Help us to improve.